The 4 / 6 circuits dimming actuator (0-10V) modules are modular installation devices with 4 / 6 circuits 0-10V outputs. EIB bus terminals are connected to EIB/KNX system, and ETS software (version ETS4.0 or above) is used for physical address allocation and parameter setting.

The execution module has 4 / 6 channels, each channel includes a relay switch output and a 0-10V output. 0-10V dimming signal interface and 0-10V dimming transformer can dimming incandescent, fluorescent, LED and other lamps. With manual control buttons, LED indicates the dimming status of each circuit.

Functions：

（1）With 4 / 6 circuits 0-10V dimming interface

（2）With 4 / 6 circuits16A switch control；

（3）With manual control dimming function；

（4）With relative dimming function and absolute dimming function；

（5）With status report feedback function；

（6）With timing cycle function, can realize stair light control and cyclic flashing control；

（7）With field save and restore function；

（8）Selection function of dimming output value and relay switch state after bus power failure and voltage recovery；

（9）With scene control function

（10）4 / 6 circuits dry contact input interface, which can input control instructions such as switches, curtains, dimming, scenes, etc., directly linked to fire emergency lighting

（11）Range of application: for all kinds of lamps (downlights, spotlights, wall lamps, light strips, fluorescent lamps, etc.) with 0-10V dimming interface drive, for control device with 0-10V interface (0-10V interface air conditioner, 0-10V fan side pipe, 0-10V fresh air system, etc.)

（12）I / O wiring communication distance: less than 10m.